red LED flashing aluminum pavement solar road stud
|Payment Type:||T/T,D/P,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CIF,EXW|
|Delivery Time:||7 Days|
|Place of Origin:||guangdong|
Model No.: WDM-DD08-6R
Detailed parameters of semicircular red LED flashing aluminum pavement solar road stud:
1. Product model: WDM-DD08-6R
2. Product size: 125*43*30MM
3. Color of lamp beads: red, yellow, blue, green and white
4. Number of lamp beads: 6
5. Red wavelength: 620-625NM
6. Yellow wavelength: 590-595NM
7. Blue wavelength: 470-475NM
8. Green wavelength: 520-525NM
9. White brightness: 18900-22600MCD
10. Protection grade: IP68
11. Shell material: cast aluminum
12. Battery voltage: 1.2V
13. Solar panel: 2.5V
14. Working temperature: -40℃~60℃
15. Working mode: light control (often flashing / always on)
Semi-circular solar road studs are solar studs as charging components, batteries or capacitors as energy storage components, using led lighting or combined with passive lighting road stud products. The visual effect of solar road studs is much better than that of ordinary road studs, and its main features are the following two. The main characteristics of solar road studs: First, the brightness of the light is large. The reflective brightness of ordinary reflective road studs is only 300MCD to 400MCD, while the luminous brightness of solar road studs can reach 2000MCD, which is 6 to 7 times that of the former. Such high-intensity light can penetrate rain and mist at night, and guide the driver safely and effectively. The second is: active light, dynamic warning. Solar spikes flash at a certain frequency at night, and its dynamic warning function is very strong. Active lighting can not only avoid the interference of rain and fog to the greatest extent, but also can make the driver's line of sight get rid of the dependence on car lights, and the visible distance is farther and the effect is better.
Characteristics of red LED flashing aluminum pavement solar road stud:1. Semi-circular solar road studs are mainly used as landscape lights in villas, residential quarters, and small gardens, to outline the contours of roads, and have various uses.
2. The semi-circular solar spikes use 0.25W/2V monocrystalline silicon solar panels. Monocrystalline silicon is a relatively active non-metallic element. In addition to its general characteristics, it has the advantages of high purity and high solar energy conversion rate.
3. The semi-circular solar road studs are designed with aluminum shell, which is strong in impact resistance, strong and durable. The solar panel is embedded in the aluminum frame, so that it can better absorb solar energy and will not be damaged by rolling.
4. The semi-circular solar road stud adopts super bright Taiwan wafer chip lamp beads. The color is eye-catching and the color is clear. It has good visual performance during the day and night, which can attract the attention of the driver and reduce Speed, improve driving safety on highways.
5. Semi-circular solar road studs are available in a variety of colors, and the color of the lamp beads can be customized according to customer requirements.
6. The semi-circular solar road stud has the protection function of over-charging and over-discharging.
7. The semi-circular solar road stud has good waterproof and dustproof effect, and the protection grade can reach IP68.
4. Installation steps of semicircular solar road studs:
1. Installation instructions:
Roadside line (not recommended to be installed in the middle of the road, to avoid excessive impact of the car and damage to the spike)
2. Installation steps for the red LED flashing aluminum pavement solar road stud:
1> Positioning: first determine the installation position with a ruler to ensure that each position is on a straight line, the installation distance and the design requirements are subject to, the installation place should be flat, dry, clean and seamless.
2> Mixing glue: A glue for road studs, B glue for road studs, the ratio of A glue and B glue is 1:1 (for example: A glue 1 kg, B glue is 1 kg). The glue must be stirred evenly and the color should be the same.
3> Glue: The road surface should be cleaned during installation, and the glue should be moderate. Both the bottom surface of the road studs should be adhered to, and the overflow should not be too much. About 40-50 grams of glue should be used for each road stud, and the glue should be applied to the bottom surface of the road signs. Place on the pre-marked location. After installation, clear road debris.
4> Patrol: After two hours, the installed spikes should be checked again.
5> Road closure: It is recommended to close the road for 6 hours to ensure the curing time of the glue.
In addition to the Semicircular red LED flashing aluminum pavement solar road stud, We also produces other solar transportation products
1. Solar strobe light
2. Solar yellow flashing light
3. Solar sign
4. Double-sided 4-lamp solar road studs, etc.
Shenzhen Wide Way Optoelectronics Co., Ltd.
ShenZhen Wide Way Optoelectronics Co.,Ltd is a professional manufacturer of LED traffic products .We are specilized in LED traffic signal lights ,arrow traffic lights ,solar road stud ,traffic countdown timer,ETC ,LED pixels cluster ,traffic guide lights .etcOur company culture is keep on science and technology innovation and we have our own research team to develop new intelligent traffic product with purpose "Keep the road more safety.Our competitive is professional and comprehensive, and we have our own factory ,so we can offer factory-direct price,strict QC before products shipping out .We also provide good after serive ,if any questions about the products or others you can contact us freely , we will give you feedback in 24 hours.
- Company Name: Shenzhen Wide Way Optoelectronics Co., Ltd.
- Representative: LiSheng
- Product/Service: traffic light , traffic light module , led arrow board , outdoor led display , highway led traffic product , led speed limit sign
- Capital (Million US $): 5000000
- Year Established: 2011
- Total Annual Sales Volume (Million US $): Below US$1 Million
- Export Percentage: 51% - 60%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 6
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: No. 2 Shenglian Road, Wulian Village, Fenggang Town, Dongguan City
- Contact Person: Ms. FionaHuang
- Tel: 86--13652406263
Premium Related Products